VUPOINT SHARE HELP CENTER

^{The VUPOINT SHARE Q is designed for ease of use and quick operation independently.}
1. Make sure to insert a microSD card to the camera before using (not supplied)
2. Press and hold the Power button for 3s until a long beep sound to turn on the camera

^{3. To take photo, point the lens towards the subject and press the Shutter button once. The camera will make a quick beep sound.}
4. To start recording video, press and hold the Shutter button for 3s and red LED will light up. The camera will make a long beep sound.

Its built-in lithium battery can continuously record up to 2 hours after it is fully charged

The VUPOINT SHARE: Q is designed with an extractable built-in connector for instant connection without pairing.

A Lightning connector for the iOS version or a USB Type-C male connector for the Android version of the camera is located in the bottom compartment.

1. Open the compartment door and release the connector lock lever to let the connector pop out

2. Plug it into your smartphone securely and launch the Smize app

3. To close, release the lock lever and press the connector back into the compartment

Close the compartment door firmly to protect the camera against any water damage

All the videos/photos taken are stored in the microSD card you installed and can be instantly accessed through the VUPOINT SHARE app:

1. Download the free VUPOINT SHARE app to your smartphone

2. Pop out the camera's connector located in the bottom compartment and plug it into your smartphone

3. Launch the VUPOINT SHARE app to playback and download the photos/videos from the camera to your smartphone instantly

There is no internal space in the camera and it supports microSD memory card in Class 10 or above up to 128GB

There are 2 Video Modes:

1. Standard (1080p @ 60fps without stabilization)
2. Stabilization (1080p @ 30fps with stabilization)

To select, plug in the camera to your smartphone and go to Capture Modes of the Settings in the VUPOINT SHARE app

- Plug in the camera to your smartphone
- Open the VUPOINT SHARE app and go to Capture Modes in the Settings
- Select your choice then unplug the camera from your smartphone to begin capturing

Note: the camera would stay with the same selected capture mode unless you make another changes

Yes, VUPOINT SHARE: Q offers a self timer that lets you choose a delay of either 3 seconds or 10 seconds and allows you to make yourself ready for a perfect group photo or selfie from a distance during the countdown.

Yes, the VUPOINT SHARE:

Q a has an in-app Remote Control feature that allows you to control it remotely from your smartphone through the Smize app.

No

The VUPOINT SHARE app requires smartphones with iOS 10.0 and above or Android 5.0 and above.

For Android smartphone: https://play.google.com/store/apps/details?id=com.smizelife.smize
For Apple iOS smartphone: https://itunes.apple.com/app/smize/id1436466493

Yes. During video recording, press the SHUTTER button once to take a photo

- Attch and twist the bottom of the camera onto the Charging Pod (supplied)
- Connect the USB plug to a USB power adapter or computer (not included)
- Purple LED will light up when charging and off after fully charged

It could be a microSD memory card issue. Make sure a microSD card with sufficient storage space is inserted in the camera. Search "storage extension" for details.

The camera is in the Time Lapse mode.
To stop the Time Lapse, press the SHUTTER BUTTON once. LED will change to Green.
To change to another photo mode, search "photo/video modes" for details

The camera's battery maybe low.
To check the battery level, it is displayed on the top of the Settings after plugging in the camera to your smartphone. Search "charge the camera" for details.

The microSD card memory is full and new storage space is required to continue recording.